| Author | Message | ||
     Mr_grumpy |
I know strictly speeekin this should be in the "wanted" section but it's Tuber specific, so there. On my '99 M2 I've got the stock Speedo & a wee bar mounted rev counter along side it which bobs from zero to 2 thou at idle. I gives me some idea of what's going on as it settles once the lump is spinning a bit, but after nearly 10 years I've decided it's time to do something about the situation. So I'm looking for a rev counter or a complete twin clock dash, either with or without speedo. I'd prefer the black plastic one (less cleaning) & can pick up the basic dash panel quite reasonably here, just can't find a clock this side of the pond. So whatcha got? I don't care if it's not pristine as the bike is a long way from that. Cheers all. | ||
| Steveford |
No wonder you're so Grumpy with that dopey little tach. I'll tell ya what, locate a nice Wileyco canister for an S1W (98 S3) and I'll see what I can round up for you in the parts pile. How's that? | ||
| Wesbuell |
Me too. Thats right, I am going to show little respect for thread placement in support of Mr Grumpy, and the fact that I want to slap a tacho on my '98 cyclone! I like the small tach mounted separately, and I know there are a couple of threads within which I have found installation tips, just want to know the best one to get. | ||
| Coxster |
i put the factory '00 Cyclone kit on my '99. It was sooooooo easy I could probably make a S3 or X1 go on without much effort | ||
| V74 |
I have the X1 fly screen and dash on my M2 and installed a mini tacho but have always wanted a buell one, I believe X1 and S3 tachos work on the M2 dispite them being single fire ignition, though could be wrong? |
