| Author | Message | ||
     Ratbuell |
Anyone got a size or a spec for them? I just test-rode my M2 for the first time in...three years? 4? Turned its first 2 miles in anger in that long, and it felt gooooood  First time I've had it out on a real run since installing all my bits: X1 forks Standard rear shock Buell race exhaust system Buell race intake Sonic-cleaned/rejetted carb Buell race bars New PR3 tires It's finally MY bike, not hers anymore!! But...on the trip to the fuel station and back I noticed it's pissing fuel out the cap (all over my non-bubbled tank...dammit) because the o-ring is so shrunk the cap doesn't fit tight and fuel can get out. So, I'm looking for an o-ring. I can pull this one off and take it to NAPA, but if anyone has the spec, size, whatever...that would be awesome | ||
| Sleez |
no specs, but p/n is; P0156.2 or old p/n; 62159-94Y | ||
| Sleez |
shows available at Latus for 12.00 ironmachine for 10.00 looks like P0156.2A is the newer p/n (Message edited by sleez on July 01, 2013) | ||
| Jramsey |
Can't remember the 00X number but 2-3/8" x 1/8", local auto parts store price .50/.75 cents. | ||
| Sleez |
just want to make sure it is gasoline rated, or it will break down quickly! http://www.marcorubber.com/materialguide.htm | ||
| Ratbuell |
Sweet! Thanks guys!! | ||
| Jolly |
I think I have one you can borrow until you can replace it if need be.... It's the full "boot"? Style or do you need something else ? Let me know and I'll go hit the parts boxes tomorrow! | ||
| Ratbuell |
Just the O-ring that goes on the cap itself. Take the cap off, turn upside-down, and there's the ring. Should press the cap into the collar when you twist the latch...mine doesn't. I'm in no rush. Bike's tags expired in 2011...I don't need to ride it, just figured (correctly) that the Collective would know what I needed...so I got lazy and typed, instead of digging into research | ||
| Jolly |
Much easier to find than the full boot piece for sure!! | ||
| Mike13 |
Al has them. American Sport Bike. | ||
| Buelljunkie |
try this link at American Sport Bike.. http://www.americansportbike.com/shoponline/ccp0-p rodshow/17314.html | ||
| Matrim |
I got one from Dsergison a while back. Maybe he still has one. http://www.badweatherbikers.com/buell/messages/476 23/485595.html?1249495403 | ||
| Analbeard |
http://www.ebay.co.uk/itm/METRIC-NITRILE-70-RUBBER -O-RINGS-3-5MM-DIAMETER-C-S-SIZES-61MM-ID-TO-90MM- ID-/221124807963?pt=LH_DefaultDomain_3&var=&hash=i tem337c10cd1b These fit, 61mm x 3.5mm |
