G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jhuppdog Posted on Friday, June 28, 2013 - 07:30 am:        The (4) bolts that hold the front caliper together on my bike are rusted and I would like to replace them with new. I have been looking in the parts manual and I don't see them shown on the parts diagram on page 38. Does anyone know what the part number is for the (4) bolts?   S1owner Posted on Friday, June 28, 2013 - 10:05 am:        Just bring one to the hardware store it is metric   Kc_zombie Posted on Friday, June 28, 2013 - 10:45 am:        2893-Y   Jhuppdog Posted on Friday, June 28, 2013 - 11:11 am:        Kc zombie I saw that part number for the two mounting bolts. Are they the same as the 4 bolts that run along the opppsite side of the caliper holding it together? S1owner That is another idea. Thanks   Kc_zombie Posted on Friday, June 28, 2013 - 11:24 am:        My mistake. Interestingly enough the parts book does not show those bolts. I would go with S1's advice...   Natexlh1000 Posted on Friday, June 28, 2013 - 12:53 pm:        In the parts book, the whole caliper is a "part". Nissin brakes are found on lots of Japanese bikes. You may very well get further at a Kawasaki dealer or something.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: