G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dannybuell Posted on Tuesday, May 14, 2013 - 06:34 pm:        I bought a Dynamic Moto Power (DMP) lift that comes with 5 pins. The 13mm works on my 96 S1 but is a sloppy fit. The next size is 15mm which won't go in. The websites that disclose size have kits with extra sizes but they are all larger... The 18mm fits into my 1125 like a glove. Has anyone dealt with this issue in a creative way? THX   Dannybuell Posted on Thursday, May 16, 2013 - 01:33 am:        anyone?   Greg_cifu Posted on Thursday, May 16, 2013 - 02:44 am:        My trusty, rusty, hyper-accurate Harbor Freight digital clapalapper measured the S1's stem hole at 14.1mm. What you've described makes sense. You need a 14mm pin.   Dannybuell Posted on Thursday, May 16, 2013 - 10:53 am:        Greg_cifu - Thank You!   Dannybuell Posted on Thursday, May 16, 2013 - 06:34 pm:        I just got back from the machine shop. I handed him a 15mm pin and asked for 14mm. It only took a couple minutes on the digital lathe. It fits perfectly! Thanks again Greg_cifu!   Greg_cifu Posted on Friday, May 17, 2013 - 12:04 am:        You're welcome Dan. Having a lathe (or access to one) is a handy thing for stuff like that.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: