| Author | Message | ||
     M2typhoon |
Looking for the part number of the updated shifter on 2002 M2. | ||
| Buell_bert |
I could not find one # for the upgrade that happened between 2000 and 2001. There are about 10-15 individual parts that I could see. I would just see if someone here has one for sale and they do show up on Ebay. | ||
| S1owner |
They do show up from time to time vertually impossible to find one new. | ||
| Ghettobirdpirate |
Part number N0618.01A1. Here is the link to the Service Bulletin for this part's installation. http://badweatherbikers.com/buell/messages/3842/B0 39-263586.pdf American Sportbike sells them, but they are pretty expensive. http://www.americansportbike.com/shoponline/ccp0-prodshow/17501.html (Message edited by ghettobirdpirate on May 12, 2013) | ||
| Jayvee |
If that's the part number for the kit, there's a few dealers have them in stock for about $75 or less. Check Latus, Surdyke, and there's a few other. Google the part number. Here's another for $56.75 (you have to cut and paste, they are not a sponsor here): buellsterparts.com/addtocart.sc?productId=1361&quantity=1 (Message edited by jayvee on May 13, 2013) | ||
| Ghettobirdpirate |
My bad. After reading the service bulletin again, I see that part number is for a kit that has everything but the shift lever itself. | ||
| Cyclonecharlie |
A few years back, Storz had a similar shifter.First class billet but expensive. I bought the shift lever only and use it as a GP pattern. Needed the space between the shifter and foot peg.(size 14+ shoe)Quality piece. | ||
| S1owner |
This is the S1 kit  | ||
| Jayvee |
OK, now we're talking $281 at: Buell Parts/content-product_info/product_id-1523/x1_m2_s3_shi fter_kit_x1_s3.html I remember when retail was about $145. |
