|Posted on Sunday, March 24, 2013 - 02:02 pm: ||
I need a new rear caliper bracket and brake pad clip for my 2000 M2; but my parts manual does not show these pieces. The steel clip that goes between the leading edge of the pads and the bracket, was left out; and so the pads wore grooves into the aluminum, so that now, the pads can no longer move freely from side to side. Maybe these pieces also fit some Japanese machines and could be purchased from non-Buell dealers ?
|Posted on Monday, March 25, 2013 - 02:17 am: ||
Clip is H0107.F
See here - http://www.ukbeg.com/forum/viewtopic.php?f=7&t=980 2
Alternatively you could go for a transformation - http://www.ukbeg.com/forum/viewtopic.php?f=8&t=142 94
Now you see it...
Now you don't...
|Posted on Monday, March 25, 2013 - 11:03 am: ||
thanks very much for writing back
|Posted on Monday, March 25, 2013 - 01:20 pm: ||
Can't tell from the threads referenced, how was the rear caliper disappeared?
I've seen kits for this, but only for the XB, not for tube-framed.
|Posted on Monday, March 25, 2013 - 02:51 pm: ||
It is a DIY kind of build.
Nice work Pash!