| Author | Message | ||
     4speeder |
Just wanted to mention that if you are tired of the warped air cleaner backplate on your S2, a high quality aluminum replacement is available. I picked up mine from Hammer Performance. The quality is simply top shelf, and it fit perfectly on my S2. With the K&N filter element and the stock front cover you cannot tell it is any different than it was. It does not have a breather fitting so I drilled and tapped mine to put a fitting in it for the stock crankcase breather hoses. If you are already running a breather system outside of the air cleaner, then you won't need to do anything, it will bolt right on.  | ||
| 4speeder |
 | ||
| 4speeder |
 | ||
| Davefl |
I got mine from asb. http://www.americansportbike.com/shoponline/ccp0-p rodshow/6184.html  There a sponsor ya know. | ||
| 4speeder |
Sorry, I did not know that. Mine was $115 including shipping. | ||
| Buellish |
They are also available through Nallin Racing Head Service.It's called the Hurricain Flow, which if I'm not mistaken is the original.I've had mine since 2005 | ||
| Buellistic |
IMHO, "i" would with this HAM CAN set up have two K&N filters for better intake breathing ... | ||
| Screamer |
Buellish, Frontier Services had the first with an aluminum backing plate and a built-in velocity stack, we sold our first in late 1996. R |
