G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Arizona_buell Posted on Monday, January 21, 2013 - 06:31 am:        So I am about to put the cylinders back on when I see the metal base gaskets. Do I put a thin layer of three bond on them or let them go dry? These are Harley factory gaskets. No O-rings.   Foximus Posted on Monday, January 21, 2013 - 10:07 am:        Professionally, I think you should leave them dry. However my inner self says put 3 bond on them. ;]   Essmjay Posted on Monday, January 21, 2013 - 10:58 am:        I have always installed them dry. No problems with leaking.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: