Author |
Message |
S1owner
| Posted on Thursday, January 17, 2013 - 07:28 pm: |
|
Any one have pics? What seates fit this tank? |
Firemanjim
| Posted on Friday, January 18, 2013 - 01:20 am: |
|
S-2 tank is just a ugly black with a fiberglass cover, what are you trying to do? |
Brother_in_buells
| Posted on Friday, January 18, 2013 - 05:22 am: |
|
Best chance to ask it Rick a |
Rick_a
| Posted on Friday, January 18, 2013 - 07:40 am: |
|
I like it. |
S1owner
| Posted on Friday, January 18, 2013 - 08:29 am: |
|
Yes i like it to! Rick i was hoping you would see this i could not remember who had that bike! Is that the factory s1 seat did you have to do anything for it to fit? As far as what i am doing a S2 tank with cover solves bubbling! |
Rick_a
| Posted on Friday, January 18, 2013 - 10:53 pm: |
|
Stock seat. It just pushes into the tank a little. |
Ratbuell
| Posted on Saturday, January 19, 2013 - 07:03 pm: |
|
You didn't ask if the *cover* would fit... There are no mounting points for the cover on an S1 frame (front corners), or on an S1 tail section (rear edges). You may be better off using an X1 setup, if you're going to try and fit the cover. |
S1owner
| Posted on Saturday, January 19, 2013 - 08:04 pm: |
|
The cover will need to be modified but i have some ideas i just picked a tank up for $20 so now i need a cover |
Rick_a
| Posted on Saturday, January 19, 2013 - 09:36 pm: |
|
There's always velcro! |
Fahren
| Posted on Sunday, January 20, 2013 - 01:17 am: |
|
^^^ Wasn't that a line from Casablanca? |
S1owner
| Posted on Sunday, January 20, 2013 - 09:43 am: |
|
That was in my attachment plan! |