| Author | Message | ||
     01x1buell |
Well my x1 has xb lights on it, and i was wondering if it is possible to have both lights on at the same time, if so how would i do this, thanks ahead of time. | ||
| Coxster |
easy. Leave the high beam alone, it can stay on the switch. For the low beam, connect directly to the battery via a relay. I would use a standard auto type 12V relay (Bosch) with the following connections as marked: 85 & 86 ignition power and ground ( depends on which relay you buy which is which ) 30 to battery, and use a fuse. 87 goes to the low beam. | ||
| 01x1buell |
that would require an extra wire to be run the the battery which for me would be ugly, i understand what you are telling me but i would like it to be clean looking with no extra BS on the bike visible, but i will go look at her right now and see what could be done. |
