G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Wack01 Posted on Tuesday, October 16, 2012 - 12:15 am:        I'm in the process of changing my steering bearing, The kit I got from all balls includes a rubber seal, but the bike didn't have one when I took it apart it only had the cover Should I install it or not? The bearing were really filthy when I removed them, but if I install them I'll have to buy another set if there a fitment issue.   Someday Posted on Tuesday, October 16, 2012 - 08:27 am:        My '98 S3T doesn't have that seal, just the metal shields. Maybe it was used on later models?   Hootowl Posted on Tuesday, October 16, 2012 - 09:07 am:        If the seal isn't in the way, I'd use it. Keeping water out of there has to be a good thing.   Bluzm2 Posted on Tuesday, October 16, 2012 - 11:40 pm:        I used the seal version on my M2 with no problems.   Wack01 Posted on Wednesday, October 17, 2012 - 12:29 pm:        cool thanks   Wack01 Posted on Wednesday, October 17, 2012 - 12:30 pm:        also bluzm2 you used both right?   Bluzm2 Posted on Friday, October 19, 2012 - 09:49 am:        Yup, upper and lower. Same on the swing arm.   Wack01 Posted on Tuesday, October 23, 2012 - 02:25 am:        I meant did you use both the metal dust seal + the rubber on top and bottom

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: