Author |
Message |
Manxman500tt
| Posted on Tuesday, July 24, 2012 - 01:07 pm: |
|
so my 2000 x1 started died then i cant get the fuel pump to prime of the starter to crank , are they on the same circuit, ie through the relays? |
Kevmean
| Posted on Tuesday, July 24, 2012 - 02:06 pm: |
|
Check the earth wires where they attach to the frame on the left hand side of the bike above the battery ..... they are prone to breaking ....If i remember correctly i think there is 3 attached to one mounting bolt. |
Manxman500tt
| Posted on Tuesday, July 24, 2012 - 02:08 pm: |
|
yeah but if that was the case wouldnt i get nothing. no lights ? everything lights up just wont crank or prime |
Thejosh
| Posted on Tuesday, July 24, 2012 - 02:16 pm: |
|
Check your ignition switch, and also your kill switch |
Psykick_machanik
| Posted on Tuesday, July 24, 2012 - 02:56 pm: |
|
also check the switch on your clutch lever, jump the wires together. |
Kilroy
| Posted on Tuesday, July 24, 2012 - 03:44 pm: |
|
also check the sidestand switch |
Manxman500tt
| Posted on Wednesday, July 25, 2012 - 12:41 am: |
|
It was the clutch switch everytime i pull in the clutch it died, ground the power wire and it starts right up |
|