G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Hybridmomentspass Posted on Tuesday, July 17, 2012 - 12:04 am:        Ok, tearing the S3 apart again (leaking base gasket on rear cylinder) and noticed something - there was/is some goo around the wires coming out of the gastank where the fuel pump etc is Is/Was it just silicone? While pulling the tank the stuff was just coming off everytime my hand brused against it, I'd like to replace it. Thanks for advice/help   Hybridmomentspass Posted on Wednesday, July 18, 2012 - 06:58 pm:        no one?   01x1buell Posted on Wednesday, July 18, 2012 - 07:04 pm:        i wish i could help you with that one, but have never ran across that yet so i do not know.   Screamer Posted on Wednesday, July 18, 2012 - 11:56 pm:        Hylomar, the blue-ish green sealant, is used under the tank cap on early tube frames, but I don't recall anything being used on the pump exits.   Hybridmomentspass Posted on Thursday, July 19, 2012 - 12:17 am:        Yeah this is a yellowish color around the wires coming out of the tank It isnt currently leaking, but if I can reapply something to help prevent future issues then that'd be great. Again, this is not where the fuel exits, but just behind it (towards seat) two or three inches where a few wires are coming out of the tank for the fuel pump

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: