G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Ratbuell Posted on Sunday, June 03, 2012 - 10:08 pm:        Rebuilding an S2T for a friend, and apparently the OEM rear plug wire, with a 90 degree boot at the plug end, is obsolete and they gave me a straight-boot wire. Problem is, a straight boot hits the petcock. Anyone got a spec or application for a rear plug wire for a tuber, with either an angled boot or a 90 degree boot, on the plug end?   Buellistic Posted on Sunday, June 03, 2012 - 10:37 pm:        Still running my OEM PLUG WIRES(1997)... Think you can still get them from J.C. WHITNEY ???   S2forever Posted on Monday, June 04, 2012 - 06:55 am:        Ratbuell, I had exactly the same problem. I run a long wire from 31964-89B (for FXD or something). Both wires in this kit have a right-angle connector at plug side. So long wire is perfect but shorter wire is a little awkward even though it works. Short wire from 31963-89A (for sportster) has a right-angle connector at coil side and it is not a perfect fit neither but it is better. I run long wire from 31964-89B and short wire from 31963-89A.   Buell_bert Posted on Monday, June 04, 2012 - 08:25 am:        I bought a kit at O'Reillys for a V-8 engine for making your own wires and I have enough for 4 sets at least. They have worked just fine.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: