G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Todsho Posted on Sunday, May 06, 2012 - 12:25 pm:        I installed a new rear tire on my X1. When removing the wheel, I noticed the rear caliper bracket installation possition. There is an allan head bolt protruding that rests on the swing arm. (this is how it was when I bought the bike) When reinstalling, I noticed a slot on the inside of the swing arm that the allan hed bolt fits nicely into. So, my question is..should the bolt be resting on the top of the swing arm or placed in the slot on the inside of the swing arm. Thanx for any info.   Thylacine Posted on Sunday, May 06, 2012 - 12:38 pm:        Should be in slot. Will work fine on top unless you ride backwards.   Natexlh1000 Posted on Sunday, May 06, 2012 - 12:56 pm:        Yeah it should be in the slot.   Todsho Posted on Sunday, May 06, 2012 - 01:31 pm:        Thats what made sense to me so thats where I put it..just wanted varification...not that I plan on riding backwards or anything..LOL...good one!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: