| Author | Message | ||
     S1owner |
What is the model and brand carb on my 96 S1 i think it is stock it has HD on it? Also does any one know the throttle cables part number and specs for size and fittings | ||
| Dannybuell |
Keihin http://www.google.com/#hl=en&sclient=psy-ab&q=keih in+carburetor&oq=keih&aq=1&aqi=g2g-s1g1&aql=&gs_nf =1&gs_l=hp.3.1.0l2j0i10j0.0.0.1.374.0.0.0.0.0.0.0. 0..0.0.dwD8YpEmfeY&pbx=1&bav=on.2,or.r_gc.r_pw.r_q f.,cf.osb&fp=56b131b81198bf9c&biw=1053&bih=675 | ||
| S1owner |
Ok do you know how to tell what model? | ||
| Ratbuell |
Stock should be a CV40. Do you need rebuild bits? Jets? What's up? | ||
| S1owner |
No i am trying to configure a new throttle i have eliminated all the switches of the bars to clean it up so now i can not figure out which throttle clamp and if needed cables! Have any input or ideas | ||
| Foximus |
1/4 Dirt bike throttle and build your own cable. | ||
| S1owner |
Fox what type of throttle you are talking about a 1/4 turn right? Can you give me some part numbers and as far as building the cables i am up for that but where do i get sll the parts i have no clue on this part! I have rebuilt the whole bike and this is my hold up go figure! | ||
| Foximus |
Any type of dirtbike throttle assembly is 1/4 turn for the most part. As for the throttle cable, you buy builder kits that come long, then you clip them down, and place an end cap on it with a cable lock to go on the carbureator end. There are some nice billet ones on ebay right now actually. http://www.ebay.com/itm/Gold-Color-CNC-THROTTLE-CL AMP-for-7-8-CRF-50-XR50-PIT-DIRT-BIKE-CRF-70-/1507 97887763?pt=Motorcycles_Parts_Accessories&hash=ite m231c412913&vxp=mtr#ht_3105wt_952 or you can take the opportunity to go to a push pull cable. http://www.ebay.com/itm/Racing-Aluminium-Throttle- Handle-Lever-Control-Dirt-Pit-Bike-Supreme-CNC-Red -/160752468582?pt=Motorcycles_Parts_Accessories&ha sh=item256d980266&vxp=mtr#ht_2394wt_952 | ||
| S1owner |
Thought i already had a push pull it has two cables? What do you think about this i like black! http://www.dimecitycycles.com/vintage-cafe-racer-c aferacer-bobber-brat-chopper-custom-motorcycle-thr ottle-parts-black-push-pull-side-exit-throttle-ass embly-44-97780.html | ||
| Foximus |
thats plastic, and not 1/4 turn... two negatives in my book. But clean looking with the bend like that. Still have that s1 swingarm block? | ||
| Dannybuell |
My Keihin is gone, I think I kept the S1 throttle cable bracket (different from HD)and dyna-jet plastic piston. Came off a 96s1. | ||
| S1owner |
I will look i bet that link you had they must sell black. Yes i still have the swing arm block and the swing arm. Whee do i get the cable build kit | ||
| Foximus |
Well... the cable build kit is up to you... I'd just search around ebay for one. Was it as steel swing arm? I really just need the swing arm block... as I'm building a custom swing arm... however I've also been looking for an Aluminum swing arm just for S&giggles. | ||
| S1owner |
Fox i ordered a 1/4 turn throttle and a venhill universal kit so i should be good thanks guys! | ||
| Foximus |
cool! Let me know what youd like for that swing arm block. | ||
| S1owner |
Make me an offer and its yours Do you know the torque specs for the two bolts that hold the front shock mount on? |
