G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Xl1200r Posted on Monday, February 20, 2012 - 06:21 pm:        I just noticed this is required every 5,000 miles or anytime you remove the cam sensor, according to my FSM. My S3 has a little over 20,000 miles on it and I don't think it's ever been done as the timing cover was still riveted. I'm in the middle of a top end rebuild, so a difference won't be too clear, but how big of a deal is this? Do you think the bike will run better after I set it?   1313 Posted on Monday, February 20, 2012 - 07:14 pm:        The static timing is more critical for fuel injected tubers than their carb equipped brethern. Since your S3 is a 2002 (and therefore fuel injected), I'd say do it! 1313   Buellistic Posted on Monday, February 20, 2012 - 11:08 pm:        IMHO, timing is critical period !!! If you do not know that your timing is 100% correct then you should check it !!! IT IS THE FIRST THING YOU CHECK BEFORE DOING ANY TUNING !!! In BUELLing LaFayette   Kalali Posted on Thursday, February 23, 2012 - 05:48 pm:        You only need to remove the timing plate if the timing is off. I check mine regularly and it has never moved, yet. 2000 X1 with 20K on the odo.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: