G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » Old School Buell » Archive through March 05, 2012 » Guide To Making Your Own Seat Cowl « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Mikethediabetic
Posted on Friday, February 17, 2012 - 03:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Ok guys here is a write up on my X1 Seat Cowl that you are asking about. This project was cheap and fairly easy if you are mechanically inclined. I will also add that i will no way be held responsible if you somehow ruin your seat. Do this project at your own risk. With that being said,here we go.

Items you will need for this project:
Your seat that you are making the cowl for
Masking Tape
Metal Ducting Tape
Vaseline
Fiberglass Resin
Fiberglass Clothe
Bondo
Finishing Bondo
Dremel or cut off wheel
Sand paper
Primer and Paint
"L" brackets from Home Depot
Felt Fabric
Spray adhesive

Ok first thing to do is take your seat and prep it for the fiberglass. I removed the strap off my seat to make it easier and to have a nicer shape. Then cover the whole seat with masking / painters tape to protect it. Then on top of the masking tape, put a layer of metal ducting tape. Then on top of the metal tape, smear a very generous amount of Vaseline. the tape protects the seat and the Vaseline acts as a release agent for the fiberglass.


Next pre cut some strips of the fiberglass clothe in various shapes that you think will cover the seat. Trust me, trying to cut this stuff while your racing against the clock of the resin hardening is not fun. Next mix your resin, follow the directions on the container for the proper mixing ratios. I used about a solo cup and a half for the seat. You want to lay the fiberglass bigger then the finished design o you have room to trim and shape. The sides are tricky, i just let everything hang off like curtains and then trimmed when it was hard. In the end i put about 4-5 layers of resin and fiberglass down. ends up being about 1/16"- 1/8" thick.


Once its hard, trim the edges with a dremel or cut off wheel in roughly the shape that you want.


Then separate the fiberglass from your seat and see ho it looks.


Now take your dremel / grinders and shape the cowl into the final design that you are after.



After the shaping is done, now come the bondo. I scuffed up the fiberglass a little so the bondo had a good surface to cling to. Try to use as little bondo a possible. just take your time on this step because if you take short cuts and laziness here, you will notice it in the end. trust me.


Once your done bondoing and sanding then put some coats of primer on it. Now you will really see how it looks and other areas that you need to sand. Also the primer lets you see the little pin holes that bondo leaves behind sometimes. This is where the finishing bondo come in. Its a lot more fine of a paste and really fill those nooks and crannies.



After its all primered and smoothed now comes time for the mounting. My picture shows my doing it after i painted, i would recommend doing it before. I used little "L" brackets from home depot. i bent one arm to contour the inside of the cowl and the other arm wraps under the lip of the seat so you can attach it. i held these in place with more resin and a piece of fiberglass over the top. it really secures them in there.


Now this next step is optional but i do recommend it. I used 3M Super 77 spray adhesive to glue a layer of felt to the inside of the cowl. This will protect the seat from anything on the cowl rubbing against it and damaging anything. Sorry but i don't have a picture of that right now.

Finally you paint the cowl whatever color you wish and put several coats of clear coat on. then buff and wax and your all done. I tried matching the the factory blue with mine. i came close enough for me to be happy with it. up close you can tell a little but if you stand more than 5 feet away the color blends very nicely. So anyway here is the final product.





Im happy with how it came out and it was a lot of fun. at the end of the day it cost me about $35-$40 to complete and thats including the felt liner and paint. so if anyone else tries this i would love to see how yours turns out. You could also play around with some expandable foam on top of the seat and get a bigger and different shape out of it. Hmmmm maybe i will make a version 2.
Top of pagePrevious messageNext messageBottom of page Link to this message

Skntpig
Posted on Friday, February 17, 2012 - 04:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Bravo...I bet you could sell those.
Top of pagePrevious messageNext messageBottom of page Link to this message

Road_thing
Posted on Friday, February 17, 2012 - 05:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Wow--nice work. Wish I'd known that vaseline trick when I built this back in '03:





rt
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluzm2
Posted on Friday, February 17, 2012 - 07:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Tom you DOG!! I have a set of S2 bodywork I'm going to do the same thing! I'm going to eliminate the tank cover/tail seam though.
Did you make a plug?
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluzm2
Posted on Friday, February 17, 2012 - 07:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

BTW, Mike really nice job. I think the X1 looks much better with the tail piece installed.
Well done!
Top of pagePrevious messageNext messageBottom of page Link to this message

Mikethediabetic
Posted on Friday, February 17, 2012 - 07:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

im glad everyone likes it. i encourage people to give it a try. i am going to experiment with other materials to see if i can make something to sell. i will keep everyone updated
Top of pagePrevious messageNext messageBottom of page Link to this message

Hogluvr
Posted on Friday, February 17, 2012 - 08:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Well done, nice job!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Dannybuell
Posted on Friday, February 17, 2012 - 11:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Excellent presentation
Top of pagePrevious messageNext messageBottom of page Link to this message

Road_thing
Posted on Saturday, February 18, 2012 - 08:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Brad: I made a buck out of styrofoam, then cut it out and dissolved the residue with acetone after I was done with the 'glass. If I had it to do over again, I'd do it the way Mike has done, just put a cowl over the back of the stock seat. MUCH easier, same visual effect.

FWIW, I found my solo seat to be much less comfortable then the stocker, because the reduced length of the seating area didn't let move around. The boys got kinda cramped...I eventually gave it away to Buellerthanyou in Austin. I don't know if he's using it or not.

Do you remember this bike?





rt
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluzm2
Posted on Saturday, February 18, 2012 - 09:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Yes! That's the one that gave me the inspiration to do mine. That's one of Rickys bikes. He did another one like it in a different color.
I've seen that one in person, there is MUCH more to it than first appears. Mirrors, windscreen, etc..
Top of pagePrevious messageNext messageBottom of page Link to this message

Road_thing
Posted on Saturday, February 18, 2012 - 10:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Ricky gave me some helpful tips when I was doing mine. I think he still posts here from time to time. He sent me this pic of one of his bikes in progress:





This is probably the other one you're thinking of:





If I remember right, Ricky told me he didn't just eliminate the seams and build the cowls, he actually sectioned the tail piece and re-shaped the entire back of the bikes. Awesome, and way beyond my ability (or ambition)!

rt
Top of pagePrevious messageNext messageBottom of page Link to this message

Outdoors
Posted on Saturday, February 18, 2012 - 11:06 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Great demo post. What I have always thought would be cool and functional would be to have an M2 seat modified with a single seat area with a covered storage compartment made into the passenger area. If incorporated into a seat pan then when riding single you would have a nice streamlined profile with a bit of extra storage but when you are taking a passenger, then a quick change of seats would allow that as well.

My idea has never made it past my head as but time and talent are lacking!
Top of pagePrevious messageNext messageBottom of page Link to this message

Qzpm150
Posted on Saturday, February 18, 2012 - 03:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Awesome I was waiting to see this. I'm going to start mine tonight! I like the idea of adding the foam to get some extra height... maybe ill play around with that.
Top of pagePrevious messageNext messageBottom of page Link to this message

Coxster
Posted on Sunday, February 19, 2012 - 01:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Great work, and thanks for the photos.

This came with my bike, it's now being used as a dust collector in the garage. Looks like it was made from the factory seat. I got a factory one thanks to a badwebber finding me one on CL( the previous owner was 5'5" and didn't use much padding, I'm 6' and don't mind the extra reach to the ground
99 M2 seat
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluzm2
Posted on Sunday, February 19, 2012 - 10:48 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Jim, you interested in parting with the "dust collector"?

Brad
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellfighter
Posted on Sunday, February 19, 2012 - 12:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Nice work Mike!
Top of pagePrevious messageNext messageBottom of page Link to this message

Qzpm150
Posted on Tuesday, February 21, 2012 - 02:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

So i did start mine the other day. I added foam to raise it up a but. Its all fiber glassed just needs to be trimmed sanded and painted.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mikethediabetic
Posted on Tuesday, February 21, 2012 - 03:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Qzpm150, Lets see a pic!!!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Qzpm150
Posted on Tuesday, February 21, 2012 - 08:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Here is a pic before I got the glass on

foam is messy
Top of pagePrevious messageNext messageBottom of page Link to this message

Nwrider
Posted on Tuesday, February 21, 2012 - 09:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Great write up! Got thinking how I want to do mine now!
Top of pagePrevious messageNext messageBottom of page Link to this message

Mikethediabetic
Posted on Tuesday, February 21, 2012 - 10:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

that looks cool. i like it alot. i might have to do a version 2 lol. you better post progress pics!
Top of pagePrevious messageNext messageBottom of page Link to this message

Gowindward
Posted on Tuesday, February 21, 2012 - 10:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Mike, Nice work!

Here is another way to skin the cat.







Top of pagePrevious messageNext messageBottom of page Link to this message

Mikethediabetic
Posted on Tuesday, February 21, 2012 - 10:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

hmmm thats interesting, didnt think of that before. i like it tho. definitly another option. but still expensive-ish
Top of pagePrevious messageNext messageBottom of page Link to this message

Qzpm150
Posted on Wednesday, February 22, 2012 - 12:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That's crazy I wanted to paint my bike just like that, with black stripes
Top of pagePrevious messageNext messageBottom of page Link to this message

Oldog
Posted on Wednesday, February 22, 2012 - 01:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

What A Seat!
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration