G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   01x1buell Posted on Friday, January 06, 2012 - 05:39 pm:        i am looking into having a cover for just the pulley made, now i was wondering what is the best way to secure this to the pulley.. i have seen it done in some pics any advice??   Onebadx1 Posted on Friday, January 06, 2012 - 09:41 pm:        Assuming your talking about the REAR pulley. The covers are held on with the pulley bolts. You can pic them up on the cheap. Why have one made?   Onebadx1 Posted on Friday, January 06, 2012 - 11:47 pm:        Never mind....   Brother_in_buells Posted on Saturday, January 07, 2012 - 04:21 pm:        Some of them are bolted to the front pulley with the same two (longer)bolts as the locking plate is bolted on. and it is also possible to drill some new holes into the pulley that matches with the pulley cover this is not mine ,but i like it!   Jayvee Posted on Saturday, January 07, 2012 - 11:13 pm:        That's pretty cool. Know what the cover is from?   Brother_in_buells Posted on Sunday, January 08, 2012 - 08:14 am:        It,s a home made piece from aluminum you can ask http://www.badweatherbikers.com/cgibin/discus/boar d-profile.cgi?action=view_profile&profile=yool-use rs http://www.badweatherbikers.com/buell/messages/142 838/541439.jpg http://www.badweatherbikers.com/buell/messages/327 77/566359.html   Littlebuggles Posted on Tuesday, January 10, 2012 - 01:19 am:        I got this one from American Sport Bike, not sure if they still stock it. The red is a second layer to the cover, the cover itself uses longer allens to secure through the locking plate. The smaller screws secure the top cover for a cleaner, more balanced look. I like the mechanical look of the one Mees posted up though. Would like one like that maybe.   01x1buell Posted on Tuesday, January 10, 2012 - 06:36 pm:        thanks guys thats what i am looking for i will call al and see what he says   Buellish Posted on Tuesday, January 10, 2012 - 06:54 pm:        The red cover above was made by Crossroads Performance.They call it a Pulley Skin.I don't know if they still offer it.I've got a black one. http://www.crossroadsperformance.com/cp/?p=226   Dutch_x1 Posted on Tuesday, January 10, 2012 - 10:49 pm:        Rizoma makes very nice covers for xb's and sportsters. Have emailed them if they would fit a earlier buell pulley bit never get a answer. Does anybody know if they would fit or could be modified? (Message edited by Dutch x1 on January 10, 2012)   Littlebuggles Posted on Wednesday, January 11, 2012 - 05:22 pm:        Ooohhh, so nice! I love their swingarm brace. I think the pulley's are pretty close on the bikes. I've got to pull my front pulley cover from my XB anyway so I'll get measurements for yal in the next day or so, if someone can compare to their tuber pulley and post that up as well?   Littlebuggles Posted on Saturday, January 28, 2012 - 05:40 am:        I've made a careful comparison of the pulley cover plate to my XB front pulley, and as far as I can tell the XB pulley is the same as the tuber part... what I mean is that I think they are made from the same blank, regardless of the number of teeth. I don't really want to pull the cover from my tuber, but can, and see if it will mount to the XB. I'm not 100% sure on this but they look the same for mounting hardware and at least pulley size and hardware location.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: