| Author | Message | ||
     Xl1200r |
Mine is bent - figured I'd put this here in case someone sees it who may not look in the classifieds section. Mine is bent, not much, but enough that you can see it if you look at it hard enough. Needs to fit a 2002 S3, so I'm assuming anything from a 1997-2002 S3 or M2 will fit the bill. Oh, and it needs to not be bent  | ||
| 5liter |
If you have the dough, get the billet one from American Sport Bike. | ||
| Brinnutz |
Just upgrade to the Billet one...stops those problems you're having....  | ||
| Xl1200r |
It's that definative of a solution, huh? I may just bite the bullet. What do I do about the little nub that supports my air cleaner? The billet ones don't have that. | ||
| 5liter |
Couldn't tell you about the nub, as I've got the race air cleaner. | ||
| Brinnutz |
ditto | ||
| Xl1200r |
I've emailed Al to see his input on it. May not even be a concern... | ||
| Brinnutz |
There's this one from the UK as well. http://www.ebay.com/itm/Buell-Front-Engine-Mount-C NC-Machined-Billet-/230710879989?pt=UK_Motorcycle_ Parts&hash=item35b770a6f5 I went with NRHS one though. | ||
| Mmmi_grad |
i fixed mine no problem and replaced with OEM motor mount, no problem for years. |
