G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Nwrider Posted on Monday, July 11, 2011 - 02:44 pm:        I am looking at buying a used forcewinder off of a carbed bike. I have an 01 x1 that is fuel injected. I don't need the xr2 with the breather tube since I have rerouted my breather with a catch can. Is the mounting the same to the throttle body the same as a carb? Thanks!   Preybird1 Posted on Monday, July 11, 2011 - 04:10 pm:        flip the intake elbow over and look where it mounts to the throttle body. If there is a tear drop shaped notch in it then you just need a different gasket to mount it. I am using a carbed force winder elbow right now and its been on for years. The notch is for the air valve\jet on the carb if i remember correctly.   Nwrider Posted on Monday, July 11, 2011 - 04:17 pm:        Perfect... I will pick it up then. Thanks Preybird.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: