G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Bsanorton Posted on Sunday, July 10, 2011 - 11:28 am:        I have the below pictured options and a few questions. If I go with the Forcewinder on my EFI X1 will I need a support bracket or is there one on the stock setup I can use? For the sensor, if I chose to run it in the air filter can I punch a hole in it or just order a filter setup for that? I also have a oval carbon fiber setup, but noticed my S3(has a CF oval on it) has a different back plate that has 1/4" round spacer where it attached to the carb for better clearance. Do I need one for the one pictured? If so anybody have a part #? Do I need a support bracket as well? Part # for support bracket?   Oldog Posted on Sunday, July 10, 2011 - 04:20 pm:        Depending on your preference I run a force, I have been told that the hamcan is better for all out performance you must use the stock bracket with the FW and the TB (X1 S3) will require mods to use the force hardware

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: