| Author |
Message |
    
Nwrider
| | Posted on Wednesday, June 22, 2011 - 09:07 pm: | 
|
I want to start tuning!!!
I am about a month out on my exhaust and the only mod I have is an econowinder intake.
I figure I shouldn't waste too much time since everything will change with the addition of the exhaust.
I suppose I could go in and make copies of my eeprom and maps. Maybe a TPS reset and drop my AFV to 100% if needed.
All good and well but... a little performance gains while waiting on my exhaust would be nice.
Your thoughts? |
Preybird1
| | Posted on Wednesday, June 22, 2011 - 11:16 pm: |
|
You don't even need to hook up to the bike to mess around with Ecmspy. I would not mess with Actually tuning it until the exhaust is on. Unless you feel you need to practice with the software. |
01x1buell
| | Posted on Thursday, June 23, 2011 - 06:41 am: |
|
Hey nwrider did you get the tuning guide i sent you |
Nwrider
| | Posted on Thursday, June 23, 2011 - 12:46 pm: |
|
Yes thanks. I read the whole thing but will probably read it 20 more times. |
Kevmean
| | Posted on Thursday, June 23, 2011 - 03:08 pm: |
|
AFV will set itself to where it needs to be ...if you put it to 100 it'll just reset back to what it was at  |
Nwrider
| | Posted on Thursday, June 23, 2011 - 05:51 pm: |
|
Thanks Kev... I just want to do something!
Its like getting a sweet toy on xmas day but no batteries!
Patience. |
01x1buell
| | Posted on Thursday, June 23, 2011 - 06:32 pm: |
|
i just put new intake seals on my bike and the afv went down to 85 so i guess that they where a little bad i adjusted for it and now it is at 105.. |
