G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » Old School Buell » Archive through July 09, 2011 » 2000 x1 breather « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Phlegm
Posted on Tuesday, June 21, 2011 - 10:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hello,
I have had my 2000 x1 for about a year now. It was down for the winter, as the person who rebuilt the engine on it used a GL-5 oil in the primary and killed the stator(IMHO). After changing out the stator, upgrading the shifter, replacing the rear isolators(front next winter!), and taking off the air scoops, I have purchased a catchcan.

I decided to route the breathers down near the battery to T up with the primary breather. I then routed the tube to the right side where I have the catchcan mounted. Does anyone see any problems with this? Just wanted to get some opinions before I mess things up.
Breather routing right side

Breather routing right side

Breather routing left side

Breather routing left side

First day at the drags last summer!! 12.69s 105.99mph 1/4mile

First day at the drags last summer!! 12.69s 105.99mph 1/4mile
Top of pagePrevious messageNext messageBottom of page Link to this message

Littlebuggles
Posted on Tuesday, June 21, 2011 - 10:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The fluid will puddle up in the low section of the line.

Keep your catch can down hill from the breathers.
Top of pagePrevious messageNext messageBottom of page Link to this message

Littlebuggles
Posted on Tuesday, June 21, 2011 - 10:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Oh, welcome!! Drag pics look fun!
Top of pagePrevious messageNext messageBottom of page Link to this message

Kevmean
Posted on Wednesday, June 22, 2011 - 09:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I wouldn't T the engine breathers to the gearbox breather ....... you don't want any problem with one area to be causing a problem with the other and you also risk engine fumes contaminating the gearbox oil.
Top of pagePrevious messageNext messageBottom of page Link to this message

01x1buell
Posted on Thursday, June 23, 2011 - 06:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

i can not find a actual catchcan for my x1 what can i use instead??
Top of pagePrevious messageNext messageBottom of page Link to this message

Nwrider
Posted on Thursday, June 23, 2011 - 08:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I used a clear fuel filter with the element removed.. just plugged the outlet with a pipe plug.
Top of pagePrevious messageNext messageBottom of page Link to this message

Someday
Posted on Thursday, June 23, 2011 - 08:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The catch-can has to be vented to the outside air, by plugging it you defeat the purpose of the breather system.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nwrider
Posted on Friday, June 24, 2011 - 12:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Gonna end up re-routing it eventually. but this is how I did it.



Top of pagePrevious messageNext messageBottom of page Link to this message

Someday
Posted on Sunday, June 26, 2011 - 08:08 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Nice idea.
Top of pagePrevious messageNext messageBottom of page Link to this message

Phlegm
Posted on Tuesday, June 28, 2011 - 02:27 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thanks for the feedback guys.
Kevmean, I went with your suggestion of not contaminating the two oils.
Nwrider, I basically rerouted the lines the same way you did, but a little different. I'll post a closeup pic tomorrow.

I also switched to sny3 hd oil last week. I think it will be worth the extra 20bucks an oil change from what I've read on the forums here.

Thanks from Humboldt County, CA
Mike

PM if you are in the area and want to ride!
Top of pagePrevious messageNext messageBottom of page Link to this message

Phlegm
Posted on Thursday, June 30, 2011 - 05:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Finished




Top of pagePrevious messageNext messageBottom of page Link to this message

99_x1
Posted on Thursday, June 30, 2011 - 05:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

use a beer can,...
Top of pagePrevious messageNext messageBottom of page Link to this message

Biggsammy13
Posted on Thursday, June 30, 2011 - 05:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

looks nice - just posted my setup on another thread...drains where the oil drains...when I unplug the thing...pic below


« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration