G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mtjm2 Posted on Friday, June 17, 2011 - 12:26 pm:        Will a chin fairing from a 01x1 fit a 01 M2 , is the hardware something I can fab or do I need original   Jsunstar Posted on Friday, June 17, 2011 - 07:23 pm:        i think the brake or shift linkage is in the way...theres something about it in the KV... lemme know if you find it   Jsunstar Posted on Friday, June 17, 2011 - 07:23 pm:        it fits fine on the S2 btw   Littlebuggles Posted on Saturday, June 18, 2011 - 12:53 am:        Yes. Which shift linkage do you have? If you have the new one the mounting block for the shifter is a one piece block on the M2 and S3. The X1 gets a two piece block and the chin mount point is sandwiched between the pieces. You could cut the plastic to slip it over the block, or cut the block in half and relieve (chamfer?) it where the halves meet to accommodate the fairing. I think it will fit fine without any mods with the old boomerang shifter.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: