G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Tod662 Posted on Friday, April 29, 2011 - 10:33 pm:        Thought I was going to be ready for the slimy crud run. A week ago broke a belt, dropped the clutch tO hard to pull her up. Cheaper to use the chain drive from another project then buy another gater belt (last got 20 to 30g) front sprocket is 1,25 in. Chain spok. Is 3/8ish any ideas. If anybodys got the spacer I need it. Update before I posted this I found a space. Now I'm going to call FMJ to see does it go on the front or back (I could just eye it up and finger it out but then I couldn't say hi. Next q I have a baker 6 and a 22 tooth front should I use a 47 ,8. Or 9. T rear ill also figure this out because I'm looking for bottom end. So thanks for the help guys

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: