Author |
Message |
Sanders
| Posted on Monday, March 21, 2011 - 09:46 pm: |
|
Over the winter I removed my fuel injection and replaced it with a Mikuni. The bike started almost instantly and ran like a dream, but the problem is my tach doesn't work now. I installed a Daytona Twin tech ignition and spliced it into the existing S3 wiring harness. The tach has a pink and a black wire and a couple of other wires for the lights, etc. The pink wire was connected to the ECM and the black goes to ground. The pink is now wired into the twin tech unit. The tach doesn't move or even jump when running. Makes me think the tach isn't getting power. Might need to do some voltage checks. Any ideas would be cool. Thanks |
|