G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Koz5150 Posted on Monday, March 21, 2011 - 02:52 pm:        I am looking for any info about if this has worked, been tried, or failed? I did find one post about someone here who had attempted to sell a sprocket in 2008 and I am trying to follow up on that. Looking for answers to the following: 1. Are the bolt holes in the same location? 2. Would I have to use a longer belt? (uly belt comes to mind) 3. Do the 61 tooth and 68 tooth have the same offset / belt width. If you have any info on this it would be greatly appreciated. Thanks, Koz5150   Blackm2 Posted on Monday, March 21, 2011 - 04:17 pm:        I believe it is the center hole diameter that won't work. Buells are smaller if I remember right.   Koz5150 Posted on Monday, March 21, 2011 - 05:02 pm:        Yeah, that can be easily bored out. i am more concerned with the bolt holes lining up.   Onebadx1 Posted on Monday, March 21, 2011 - 05:31 pm:        Yes. They are the same bolt pattern. Like everyone else said, must bore out the center hole. I put one on my X1.   Onebadx1 Posted on Monday, March 21, 2011 - 05:52 pm:        Correction: I put a 61 tooth sprocket on. Not sure about the 68T

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: