G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » Old School Buell » Archive through March 20, 2011 » 2K x1 engine noise diagnosis « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Alfau
Posted on Tuesday, March 08, 2011 - 10:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hope this is the right aproach.My first post.
I have searched the archives trying to diagnose my mystery noise and found this post regarding the same noise.
It was as Posted by "paul_in_japan" on Wednesday, May 19, 2010 - 11:45 am: (I can't find it again):-) I tried contacting him with no response.
http://www.youtube.com/watch?v=lE-1zbiWIaI

There were a number of responses to his post indicating that they have the same problem but unfortunately noise was not identified. If you play his youtube post above listen for the pulsing sound.
I would appreciate your thoughts.
Thanx Alf
Top of pagePrevious messageNext messageBottom of page Link to this message

Serialk
Posted on Tuesday, March 08, 2011 - 11:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

It sounds like the healthy valve train noise of an American v twin engine.

In my Opinion :
That sound is your valves and oil being brought to the top end
Top of pagePrevious messageNext messageBottom of page Link to this message

Alfau
Posted on Tuesday, March 08, 2011 - 11:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have owned the bike for nearly three years. The noise devaloped in the last few rides It is quite loud and not what you would expect from a healthy engine.
Listen beyond the normal valve racket and you'll notice a rythum coming and going,pulling in clutch makes no difference, as engine picks up revs the noise gets louder and faster.
What sort of noise does a failing oil pump drive gear make? clutch bearing?gearbox bearings?
Top of pagePrevious messageNext messageBottom of page Link to this message

Mick
Posted on Wednesday, March 09, 2011 - 12:46 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I'd be checking the crank nut , makes a rumbling noise seen a few loose ones.
take off the inspection cover on the primary
and get a torch and screwdriver, see if you can turn the nut.
Top of pagePrevious messageNext messageBottom of page Link to this message

Alfau
Posted on Wednesday, March 09, 2011 - 04:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have in recent times in an attempt to address this issue :- replaced the detent plate which had moved and was worn by the starter ring gear on the clutch basket but still functioning,new primary chain and tensioner. the old chain was on it's last legs but still within acceptability.
I had the altinator off(front drive sprocket)and checked the glued on field windings,all seemed secure.aparently a significant possibility ..200 lb tension on the front sprocket nut.
The youtube example I posted wasn't my bike but it seemed to me that this is a common possibility because three people related to the problem ,now me.
Hope someone could relate.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bobberbuell
Posted on Wednesday, March 09, 2011 - 07:07 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I had something similar on my s1,a loud ticking,it turned out the oil line that enters the pump was partially blocked.
Top of pagePrevious messageNext messageBottom of page Link to this message

Paul_in_japan
Posted on Sunday, May 01, 2011 - 12:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hey Alfau, I just saw your mail in my inbox. Sorry I only use that email address to join websites etc. and rarely check it. As for the noise I am still unaware as to what it is. My bike is still in pieces in the shed. With parts and labor costing so much here and the fact that I dont know what the problem is I decided to look for second hand engine instead. None surfaced over winter then I recently got a good deal on a '07 XB12r. I am still keen to fix my other bike. I re-posted my problem a few months back. I thought some Harley Engine expert would be able to pinpoint the problem straight away given the symptoms and considering how common these engines are. No go. Could be this, might be that, try changing this. I can't afford time and money wise to change every potential problem part. If you can pin point your problem let me know.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration