G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Foximus Posted on Tuesday, March 08, 2011 - 07:00 pm:        Can anyone give me the EXACT measurement in mm, the width of the inside of the rear motor mounting block where the swing arm mounts? OR the measurement of the outside of the pivot point of the swing arm (mounting point to mounting point) Thank you.   Foximus Posted on Thursday, March 10, 2011 - 12:15 am:        nobody has a rear motor mount block or a swing arm that is on their work bench they could measure?   Rick_a Posted on Thursday, March 10, 2011 - 12:17 am:        I may have one for you on the weekend...but certainly not today.   Foximus Posted on Thursday, March 10, 2011 - 12:21 am:        Thank you very much rick. That would be hugely appreciated.   Road_thing Posted on Thursday, March 10, 2011 - 08:23 am:        Later this afternoon or tomorrow I can measure one for you. rt   Foximus Posted on Thursday, March 10, 2011 - 11:09 am:          Leftcoastal Posted on Thursday, March 10, 2011 - 12:32 pm:        I measured the one I have from an S2 I used a carpenter inch/metric tape measure and got: 204mm for the swingarm width 208mm for the inside of the mount block. These are maybe not as precise as you need. I don't have a caliper that will span that distance. Hope that gets you in the ballpark. Al   Brother_in_buells Posted on Thursday, March 10, 2011 - 01:43 pm:        Mounting block from a 98 s1 inside is 210 mm   Road_thing Posted on Thursday, March 10, 2011 - 07:07 pm:        Fox: Sorry, I thought I had a loose one on the bench, but they're all on motorcycles. rt   Foximus Posted on Thursday, March 10, 2011 - 07:13 pm:        Thanks guys. That should get me exactly what I need. Which will hopefully end in something cool.   Foximus Posted on Wednesday, March 16, 2011 - 02:15 pm:        And on that note... what is the diameter of the shaft of the pivot bolt that the swing arm rides on? Thanks again in advance

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: