| Author |
Message |
    
Gmaan03
| | Posted on Tuesday, April 12, 2011 - 02:58 pm: | 
|
is this two parts, one drawing is 16mm wide and the other is 23mm wide???? |
Phoebe
| | Posted on Tuesday, April 12, 2011 - 04:27 pm: |
|
Yes, it's two separate spacers. |
Guell
| | Posted on Tuesday, April 12, 2011 - 07:39 pm: |
|
that drawing looks like the ones i have sitting on my desk. |
Gmaan03
| | Posted on Tuesday, April 12, 2011 - 10:57 pm: |
|
thanks so the flange thickness is the only difference.
I'll see what I can do. |
Goldtooth
| | Posted on Wednesday, April 13, 2011 - 10:55 am: |
|
yes the flange thickness is different for each side. the thinner side is on the brake caliper side.
you will also have to trim the caliper mount. i milled mine down about .125"
nate |
Gmaan03
| | Posted on Thursday, April 14, 2011 - 11:38 am: |
|
I have three sets if any one in interested.
all I want is postage and enough to buy a six pack.............. |
Blks1l
| | Posted on Thursday, April 14, 2011 - 03:28 pm: |
|
PM sent, Goldtooth will these work on the aluminium, and steel, or they different?
(Message edited by Blks1l on April 14, 2011) |
Goldtooth
| | Posted on Friday, April 15, 2011 - 11:01 am: |
|
don't know about the steel swingarm but i assume so. i have an x1 |
Deanh8
| | Posted on Friday, April 15, 2011 - 11:44 am: |
|
They seem to work on my aluminum swing arm, thanks a lot for meeting up with my grandfather yesterday gmaan! |
Gmaan03
| | Posted on Wednesday, April 20, 2011 - 03:39 am: |
|
I am glad they worked, your grandfather is a nice guy. we'll have to plan a ride this summer. |
Buellmanmike
| | Posted on Saturday, December 23, 2017 - 02:55 pm: |
|
I have the spacers, and the wheel. Trying to figure out how much the caliper bracket has to be machined and where, as well as which side the spacers go on...? |
|
