G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Msr203 Posted on Tuesday, February 01, 2011 - 03:46 pm:        I am putting new seals in a 1999 s3 and I am looking to find parts break down and torque specs with oil levels thanks Mike   Oldog Posted on Wednesday, February 02, 2011 - 11:09 pm:        look in the kv I did A replace seals and new fluids a few years back its fairly detailed and is on the showa front end. fill level is about 3 1/2" from the top legs fully compressed ( springs out I think ) I am not close to my fsm, so I am not totaly sure on this.   Pash Posted on Sunday, February 06, 2011 - 03:41 am:        Are they not WP on an S3? If so, the free S1 manual that floats around the internet should give you the info you need (oil levels may be different though but the parts breakdown should be the same). Try here - http://www.ukbeg.com/downloads/files/manual/bu2b.p df   Buellistic Posted on Sunday, February 06, 2011 - 07:25 am:        If you forks are not leaking when you decide to change the fork oil do this !!! Drain each fork into a measuring cup which will indicate how much oil to put back in !!!   Harleyelf Posted on Tuesday, February 08, 2011 - 10:31 am:        I don't know if they all did, but my '99 S3 fork tubes have dipsticks! The book says type "E" fork oil, 15.4 oz each.   Kalali Posted on Tuesday, February 08, 2011 - 10:35 am:        "...my '99 S3 fork tubes have dipsticks!" First I hear about this but I have an X1 so it probably has different forks. Could you explain or snap a picture of this dipstick?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: