| Author | Message | ||
     Slayer5690 |
finally done with my winter work   | ||
| Redefine420 |
Damn, winter just started and you're done already?! You should add more to your list. Looks good | ||
| 4traxx |
Looks good & like you should be riding it . | ||
| Two_seasons |
Sure do like that yellow. You might want to consider installing a billeted cover for your brake reservoir as well. American Sport Bike in Covina, CA sells them and they are a BadWeb sponsor to boot! Al also sells a polished tail if you are interested. What happened to your flyscreen? (Message edited by two_seasons on December 26, 2010) | ||
| Kalali |
The bike looks nice but why does the rear end stick so high?! Looks a bit odd IMHO. | ||
| Brinnutz |
I like the raised tail. I just gotta ask what the heck are those two things running from under the tail to the passenger peg loop mounts? | ||
| No_rice |
id guess thats what took the place of the bottom tail section mounts... cant tell for sure but it doesnt look like the bottom mount for the tail is bolted to anything. | ||
| Slayer5690 |
kalali: i'm going for a slight streetfighter look brinnutz and norice: the line on the right side is actually from the rear brake res, the line is just long enough so i want to get a longer line so i can run it more discretely. I made brackets to do the tail raise from the original bracket and used black hardware so so it isn't as noticeable thanks two_seasons I'll look into that, when i ride the fly screen directs the wind to the top of my head and face and makes my neck tired. with out it the wind hits my chest and i use it to hold me up on the highway so my arms don't get as tired. with those clip ons at least | ||
| Kaput |
I like! What make of clip-ons are those? | ||
| Slayer5690 |
kaput the are lsl one inch rise clipons. they do make contact with the pinch bolt but i think the angle is fine. | ||
| No_rice |
brinnutz and norice: the line on the right side is actually from the rear brake res, the line is just long enough so i want to get a longer line so i can run it more discretely. I made brackets to do the tail raise from the original bracket and used black hardware so so it isn't as noticeable ah, well it was a decent guess anyway lol. and ya, id definatly route it up by the frame when you get a chance. | ||
| Backnblack |
WTF, looks like euro trash. Please return to original state. | ||
| Bluzm2 |
I never understood the "ass in the air" look. | ||
| Slayer5690 |
I like the "ass in the air" look cuz I think it makes the bike look more forward instead of sagging in back also it sits me up higher. on the other side though i don't like it so high but to do it any lower would require me to modify the original tabs and I want all my mods to be reversible | ||
| Brinnutz |
It's always better than dragging ass! | ||
| Jsunstar |
its weird. not as weird as this! makes me cringe...  | ||
| Slayer5690 |
lol thats just to extreme for me, I'd like it if the back was level with the tank but like i said i'd have it lower if it didnt require serious moding |
