| Author | Message | ||
     Onahog |
Can anyone tell me if a H0201.R front brake rotor will fit my 1996 S2T? Joe...Frank ??? It states its for a X1,M2,S3 Ebay # 140422712936 | ||
| F_skinner |
Yes Hank, it will fit. Frank | ||
| Brinnutz |
Yeah, it should fit every tuber. | ||
| Ratbuell |
Only thing to watch out for is the bolt holes - are they countersunk? Or not? Just make sure to use the right bolts for the holes is all  | ||
| Bluzm2 |
What Rat said. You need to get the correct bolts. Just order a set when you get the rotor. I put one on my sons S2 a few years back, no problems, bolts right up. New bolts have the Loctite already on the bolts. | ||
| Onahog |
Kewl..Thx guys...I thought it would work, just wouldnt be OEM for it.. Theres a few on ebay and come with the bolts supplied..$160.00..i figured Id grab one up for the future..ya think thats a pretty fair deal on em?..???? | ||
| Fahren |
For anyone with an aftermarket rotor, like the Prolite, for example, needing button head screws, the OEM Buell XB rear rotor screws are perfect, and cost is very reasonable. They have the loctite/nylock stuff on them, too. (Message edited by fahren on October 29, 2010) | ||
| Sportyeric |
You're a little slow out of the gate. Those were selling for $100 last spring. I got one then. It worked well for a bit but has since picked up a pulsing that I haven't yet investigated. |
