G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Triman023 Posted on Thursday, October 28, 2010 - 12:38 pm:        OK new problem, now that the S2 is running well. My speedo quit yesterday. I could see that the cable was hanging loose from the drive unit. Didn't see any broken end to it so I popped it back in and it worked till it fell out again. I have it fastened on with zip ties right now. The manual doesn't show a fastening sleeve. Does the cable thread into the drive unit? What do I need to replace?   Bluzm2 Posted on Thursday, October 28, 2010 - 01:31 pm:        The cable threads into the drive housing. The cable housing is wound of wire like a screw. This threads into the housing. Brad   Triman023 Posted on Thursday, October 28, 2010 - 06:37 pm:        Thanks Bluz! Threaded it back in, sometimes the simplest things are puzzling...   Bluzm2 Posted on Thursday, October 28, 2010 - 10:00 pm:        BTW, if it's backing out, your flange nut on the top is loose...

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: