Author |
Message |
Buellcanuck
| Posted on Sunday, September 12, 2010 - 02:22 pm: |
|
Hey guys curious if anyone knows the rotor bolt pattern on the front wheel for the 340mm rotor. Thanks |
Jramsey
| Posted on Sunday, September 12, 2010 - 02:42 pm: |
|
3.250 diameter, the 5 holes are spaced 1.910 apart. (Message edited by jramsey on September 13, 2010) |
Buellcanuck
| Posted on Monday, September 13, 2010 - 04:38 pm: |
|
Hey thanks for the info. you happen to know the diameter of the hole on the rotor where the hub goes through? |
Jramsey
| Posted on Monday, September 13, 2010 - 05:29 pm: |
|
Hub is 2.375, oem rotor hole dia. is about .010 over. |
Hootowl
| Posted on Monday, September 13, 2010 - 05:38 pm: |
|
This place is amazing. |
|