G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Griffo Posted on Saturday, August 14, 2010 - 03:27 am:        -------------------------------------------------- ------------------------------ I'm getting a few calls from people wanting to change the gearing and/or speed sensing on tube frame models. The Australian gearing is very high - I'm told that this was to met noise regulations. From what I can tell from the workshop manual the speed sensor is the same for all countries and so I'm guessing that the correction is done in the speedo. After market speed calibrators are available but the ones I've seen ar all pretty pricey. So does anyone know how you correct the speed sensing if youve changed the secondary gearing?   Jramsey Posted on Saturday, August 14, 2010 - 12:54 pm:        SpeedoHealer's run about $100 USD.   Buell_lee Posted on Monday, August 16, 2010 - 11:03 pm:        I just used a s/h USA speedo I got off eBay, they have both MPH and KPH. I have had it on there for 3 years and never had trouble registering it.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: