Author |
Message |
The4ork
| Posted on Friday, June 18, 2010 - 09:41 pm: |
|
hey guys, i recently picked up a force exhaust used, and i used to have a vance and hines muffler with a stock header. i noticed that the bracket for the muffler in the aft of the bike is different and i did not get a bracket with the force. i think the bracket for the vance and hines is different than stock, does the force muffler use a stock bracket? or a force specific bracket? does anyone have the piece i need or at least the measurements so i can build one? |
Eshardball
| Posted on Saturday, June 19, 2010 - 09:51 am: |
|
I used a generic auto parts store hanger with urethane bushings on both ends. I have had no issues with it as long as you use locktite |
The4ork
| Posted on Monday, June 21, 2010 - 04:07 pm: |
|
got any pics? anyone got any pics of the force piece? |
Phelan
| Posted on Monday, June 21, 2010 - 05:02 pm: |
|
Rear hangar my custom front hangar
|
The4ork
| Posted on Monday, June 21, 2010 - 07:09 pm: |
|
Looks simple, guess I'll take my rear bracket off and use a piece of flat stock... Why the welded piece up front? |
|