G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » Old School Buell » Archive through July 08, 2010 » Whoo hoo! took the clutch basket apart without using the HD tool! « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

The4ork
Posted on Friday, June 11, 2010 - 06:50 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i used 3 of these!



then replaced the spring plate with 2 steel plates and a clutch plate

now for the reassembly with xb12 primary sprocket and chain!
Top of pagePrevious messageNext messageBottom of page Link to this message

Jos51700
Posted on Thursday, June 17, 2010 - 06:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

C-Clamps and some shop towels are more worth a shot, too.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Thursday, June 17, 2010 - 10:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

That just proves again that factory tools are for technicians, real MECHANICS think out of the box and can IMPROVISE !!!
Top of pagePrevious messageNext messageBottom of page Link to this message

The4ork
Posted on Friday, June 18, 2010 - 05:57 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

hopefully i dint miss anything when i put it back together... the manual needs more pictures for us yokels!
Top of pagePrevious messageNext messageBottom of page Link to this message

Down_on_my_stimulus
Posted on Tuesday, June 22, 2010 - 01:29 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

you have freed your mind, cool!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Jos51700
Posted on Wednesday, June 23, 2010 - 02:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

That just proves again that factory tools are for technicians, real MECHANICS think out of the box and can IMPROVISE !!!

Not quite.

Factory tools are for the technician that's busting his hump to break flatrate so he can buy shoes for his kids, without damaging expensive parts. His machanical ability is not necessarily compromised by using factory tools.

Mechanical improvisation is for those who are willing to risk breaking parts in order to get the job done.

Or some would say, "work smarter, not harder".
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Wednesday, June 23, 2010 - 07:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

A lot of BUELLers do not want to take their BUELLs to a H-D DEALER, wonder why ...

Do my own work and that is why "i" have 109,451.2 miles as of the last ride ...

Jas51700 know where you are coming from as "i" was in your position in the 1960's ...
Top of pagePrevious messageNext messageBottom of page Link to this message

Firstbuell
Posted on Wednesday, June 23, 2010 - 08:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

why put that different XB primary sprocket on yer tuber?
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Wednesday, June 23, 2010 - 10:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

If you have the Horse Power to pull the taller B12X motor it will drop the cruse'ing RPM's on the Interstate at
70-80 MPR where BUELLs run the best ....

Put a XB12X motor sprocket on my BLAST so it could run 70-80 MPR on the Interstate with out sounding like a METRIC BIKE ...
Top of pagePrevious messageNext messageBottom of page Link to this message

Firstbuell
Posted on Wednesday, June 23, 2010 - 11:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

'istic,

ah, I see - thx for detailed response

my Terry Parsley-spec'd 90-inch M2 makes 40mpg with 100hp/100lbs-ft -
is this tooth mod appropriate for my power level?

what's tooth-count difference between XL-M2 & XB9/12 sprockets?
additional XB tooth-counts available?
Top of pagePrevious messageNext messageBottom of page Link to this message

V74
Posted on Thursday, June 24, 2010 - 08:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

which year XB front motor sprocket and chain will fit my 99 M2 as i know some are different ?
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Thursday, June 24, 2010 - 09:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

ENGINE SPROCKET(38T) H-D PN 40290-04
which isa 3 tooth increase(higher gearing) ...

OEM TUBE FRAME motor sprocket is a 35T ...

PRIMARY CHAIN(longer) H-D PN 40147-04 ...
Top of pagePrevious messageNext messageBottom of page Link to this message

The4ork
Posted on Friday, June 25, 2010 - 02:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i think your sposed to stay away from the '03 gears irrc...

its a 10-11% increase in gearing. i figured with the engine mods ive done it wouldnt phase me to have the thing geared 10% higher. plus maybe ill get a few mpg while doing routine maintenance ;P clutch should feel better now too since i added an extra friction plate

im on ported xb heads and slightly raised compression.

i still need to ditch the stock s1 cams and at least get the late model cams, 585 is what i really want tho!
Top of pagePrevious messageNext messageBottom of page Link to this message

V74
Posted on Friday, June 25, 2010 - 01:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i have uk gearing and want it geared a bit lower,
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Friday, June 25, 2010 - 01:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Drop two belt teeth on your counter shaft sprocket ...
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration