G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Marran Posted on Saturday, May 29, 2010 - 04:06 pm:        Hi, Do I need to remove the entire front wheel in order to change the speedo drive on my S1 or is it possible to slide it in with just pulling the pin out a little bit? And if I have to take the wheel of can I do that without removing the brake caliper? Thanks Marco in Stockholm, Sweden   Buellistic Posted on Saturday, May 29, 2010 - 04:20 pm:        Marron: You can get the DRIVE UNIT,speedometer PN 67127-84A with out removing the wheel ... "NOW", if you want to remove the wheel it is easier to remove the front rotor than mess with the caliper ...   Marran Posted on Saturday, May 29, 2010 - 04:33 pm:        Thanks I'll try tomorrow and let you know how it goes...   Ratbuell Posted on Sunday, May 30, 2010 - 10:00 am:        You can keep the wheel in place, but the axle has to come all the way out. Keep track of the spacers, too - they need to go back in the right way

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: