G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Kfry Posted on Friday, May 14, 2010 - 05:41 pm:        having trouble removing the intake manifold to get to the head cylinder. dont have an allen ball bit. i was wondering if anyone had this problem before and could help. any ideas would be greatly appreciated   Spiderman Posted on Friday, May 14, 2010 - 06:28 pm:        Two thinks you can do. Cut down a allen key OR If you have a garbage disposal, the installation stool should look like this. It is the same size as the allen key needed for the intake manifold bolts, 1/4 inch.   Buellistic Posted on Friday, May 14, 2010 - 07:22 pm:        "i" went to hex head bolts ... Easier to TORQUE ... Easier to safety wire ... "BUT", in your case a piece of 1/4" allen wrench, a long flat 1/4" box end wrench and you have made your first BUELL tool ... If you got the one with a box end on both ends, a coupler nut and a torque wrench you can torque them ...   Ebutch Posted on Friday, May 14, 2010 - 09:07 pm:        If you do not have you must buy or have somebody do it for you or barrow.Harley has one like above maybe stronger reasonable too.   Ebutch Posted on Friday, May 14, 2010 - 09:09 pm:        You have many good choices!   Ebutch Posted on Friday, May 14, 2010 - 09:15 pm:        Cut the 1/4 allen wrench about 3/4" long and use box wrench as above. I use for when really stuck!   Ratbuell Posted on Friday, May 14, 2010 - 09:40 pm:        http://www.americansportbike.com/shoponline/ccp0-p rodshow/5029.html And....he's a sponsor   Spiderman Posted on Sunday, May 16, 2010 - 05:57 pm:        I hate to cut into Al's bidness, but what does that tool look like...   Ebutch Posted on Sunday, May 16, 2010 - 09:56 pm:        I,ll check-out pluming section.Never needed garbage disposal with Big dogs.   Spiderman Posted on Monday, May 17, 2010 - 08:43 am:        Rots are awesome!   Iman501 Posted on Monday, May 17, 2010 - 03:28 pm:        haha kyle see badweb people are super smart! you should come around more than when you just need mechenical help!   Hootowl Posted on Monday, May 17, 2010 - 04:26 pm:        "Rots are awesome!" Aye   Ebutch Posted on Monday, May 17, 2010 - 09:42 pm:        Spiderman I feel like I went on a Snipe-Hunt,Two Pluming stores no S allen Tool for gar.Dis!!!   Spiderman Posted on Monday, May 17, 2010 - 09:51 pm:        LOL well it usually comes with the disposal... http://www.amazon.com/InSinkErator-WRN-00-JamBuste r-Wrenchette/dp/B000BQ7WE0 If you have to buy one you might as well buy a tool from AL...   Buellistic Posted on Monday, May 17, 2010 - 09:51 pm:        "IMPROVISE !!!"   Ebutch Posted on Monday, May 17, 2010 - 10:13 pm:        Improvise Is An Army stranded Order!!!!LaFayette:That Scott Free Tool Is The Nuts!!!!!Works Like a Dream!!!!!!!Thank You!!!!! Did S3 last week-end. Spiderman: I will Snipe Hunt some Moore!!!! (Message edited by ebutch on May 17, 2010)   Jim2 Posted on Tuesday, May 18, 2010 - 11:36 am:        Any Ace hardware should have them. I still recommend the American Sport Bike one. It has a ball-end on one side so it does more.   Spiderman Posted on Wednesday, May 19, 2010 - 07:18 am:        I still recommend the American Sport Bike one. It has a ball-end on one side so it does more. Agreed. Mine was a free, it should already be under your sink if you have a garbage disposal, quickie...

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: