G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Ebutch Posted on Friday, April 30, 2010 - 09:03 pm:        Can M2 race header be used on Inj. eng. if a union was welded in same place for ox sens.? http://cgi.ebay.com/ebaymotors/Buell-Exhaust-Race- Header-99-00-M2-Cyclone-91423-99Y-/290430403647?cm d=ViewItem&pt=Motorcycles_Parts_Accessories&hash=i tem439f00443f#ht_2123wt_958   Buellistic Posted on Friday, April 30, 2010 - 09:16 pm:        "YES", if you put a fitting on for the O2 sensor for the rear cylinder provided the header will fit the Model in question ...   Ebutch Posted on Friday, April 30, 2010 - 09:37 pm:        Lafayette Is it the same as inj. high-performance header less ox. bung sensor,only diff is no sensor port on M2?You probably already answered.Thanks for email literature!!   Buellistic Posted on Friday, April 30, 2010 - 10:13 pm:        K&N has a O2 sensor plug PN 85-2440 for $15.99 which is pricey ... Or you can go to a Mom & Pop hardware store and get a bolt that will fit, "BUT" you will have to cut the bolt so that it does not protrude into the exhaust pipe ... Either one should be safety wired so that it does not back out if it gets loose ...

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: