| Author | Message | ||
     Purpony |
Who has clip-ons on their tuber? could you post pics? How do you like the riding style? If i can get get my renthals to fit with my XB forks, i was thinking of putting on a set of adjustable clip-ons over my triple attached to the fork sticking above the triple. thanks | ||
| The_italian_job |
I have it on my S1, I love it...   | ||
| Preybird1 |
hey italianjob what are the 2 red lines coming around the side of your bike go to! | ||
| Brinnutz |
It's an oil cooler. | ||
| Spiderman |
Had/have some on MJ  | ||
| Skntpig |
If you put enough fork above the triple it will drop your front end enough to mess up the handling and cornering clearance unless you use longer forks. | ||
| Purpony |
I have to put the forks up about 1.5" to get it to clamp correctly. I could go with XB triples but thats a whole other issue. I could drop there rear a little. My last bike, 03 R1 I lowered 2" front and rear and it handled just fine. I would rather not lower it any, but to get the XB wheels, i have to just a bit. thanks for the pics all. I have been out measuring tonight and i will need a min of a 1.5" spacer for the handlebars, but so far I have only found a 1" or something like the 2" adjustable ROX spacers.... or clip-ons.... | ||
| Purpony |
I have an S2 upper coming that i was going to use with either clipons or thinking or drilling 2 holes in it and bolting on a set of handlebar mounts. This will allow me to made a spacer and bolt them on at the correct height i need to clear the forks. | ||
| Texastechx1 |
  not exactly the clip-on you're talking about but it is a type of "clip-on" | ||
| Spiderman |
MAN that's a bolt on! lol  |
