| Author | Message | ||
     Dirt |
Looking for a few parts for my S2T hard bag. I'm missing a left side female hinge, a hinge spacer block and a hinge gasket. In addition I need one of the hooked shape lock cams (the cam is the piece that is bolted to the end of the lock cylinder and is used to latch the lid closed). I checked with the dealer and it looks like everything is available except the spacer block (part #90997-94Y) and the lock cam (90778-94Y). Dealer says the numbers for these two items are obsolete and no longer available. The rest are still in the system and supposedly can be ordered. So, wondering if anyone has either a spare cam lock or spacer block they might want to sell, before I start trying to make them? Thanks | ||
| Ratbuell |
Have your dealer check the cam lock for a current POLICE saddlebag lock. IIRC, my 96 FLHP had the hockey puck open/close latches, and the lock latch was very similar - if not the same - as the S2 latch, located on the back of the FLHP saddlebag. That design has not changed, even up to the '10 police bikes. | ||
| Ebutch |
Dan I used old wheel balance weights (2 of them drilled) for hinge spacers. |
