G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Old School Buell » Archive through March 17, 2010 » What is recommended for replacement oil line « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Maru
Posted on Sunday, March 07, 2010 - 07:08 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I noticed my S2 has been chewing on the sleeve and oil line near the back side of the primary as the engine moves up and down. What do you guys recommend for replacement line and where can I get it?
Top of pagePrevious messageNext messageBottom of page Link to this message

Maru
Posted on Sunday, March 07, 2010 - 10:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I was planning on just getting some 5/16" rubber fuel line but was not sure if it was compatible with oil.
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemick
Posted on Sunday, March 07, 2010 - 10:46 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I replaced all my oil lines with stainless steel braided lines! They look nice and are much better quality. Picked them up at a local import speed shop!
Top of pagePrevious messageNext messageBottom of page Link to this message

Maru
Posted on Sunday, March 07, 2010 - 11:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I prefer not using braided stainless. The stuff tends to chew on anything it touches unless shielded with something.
Top of pagePrevious messageNext messageBottom of page Link to this message

Maru
Posted on Sunday, March 07, 2010 - 06:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

For those that may be interested, the lines are 3/8" and it must be oil line, not just fuel line.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dblast
Posted on Sunday, March 07, 2010 - 07:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I used Gates transmission cooler hose from a auto parts store. It is for oil and it is rated for high pressure.
Top of pagePrevious messageNext messageBottom of page Link to this message

Maru
Posted on Sunday, March 07, 2010 - 07:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks D.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluzm2
Posted on Sunday, March 07, 2010 - 10:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Keep in mind one of the hoses is a suction hose, pressure doesn't matter.
You really don't want that one collapsing.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Sunday, March 07, 2010 - 10:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

IMHO, as others will recommend is AUTOMATIC TRANSMISSION LINE(you can put wire brade'ing over it if you want) ...

As a PREVENTIVE MAINTENANCE you should check your oil lines for RUB PLACES ...

If you find one or more you can take an old oil line and cut to length split'ing it to fit over the hose placing at the rub spot holding in place with safety wire ...
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration