| Author | Message | ||
     Firemanjim |
I am in need of a carbed tuber intake. Working on Rex's bike and the one I have will not seal even with new seals and tons of Sil-glyde. Tried twice and am done struggling with it. | ||
| Firemanjim |
No one gonna help a brother out?????? | ||
| Spiderman |
I don't have one, sorry  | ||
| Tbolt98 |
what exactly are you looking for... I have a stock airbox collecting dust, PM me if that will help. | ||
| Hootowl |
Me either  If I had one it would already be in a box on its way to you. (Message edited by hootowl on March 03, 2010) | ||
| Maru |
What do you need, the y manifold? | ||
| Brinnutz |
Jim, email me. I probably have what you need. Send a pic or whatever you need to show me, and I'll let you know. I think I'll only owe you one beer then..LOL | ||
| Firemanjim |
I need a stock intake manifold--from head to carb. | ||
| 4dwuds |
Have you tried a liberal amount of axle grease all around on the inside of the sealing areas. I smear some on the inside of the seal as well as on the manifold mating surface, and inside the female area of the seal that mates with the head. It works for me. Yea it can get messy but it will fill the void that's letting in the air. | ||
| Brinnutz |
Well that is one thing I don't have an extra of... | ||
| Firemanjim |
Used copious amounts of Sil-glyde,made for this stuff, and after second time knew it was not me.It is a dang Screaming Eagle intake----- | ||
| S2pengy |
Jim If I had one it would be headed your way.. Sorry | ||
| Hootowl |
http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=47623&post=1743417#POST1743417 guy parting out an M2 | ||
| Fahren |
Jim, what's wrong with a SE intake? | ||
| 4dwuds |
Ah Ha, that explains it,,,, Truck parts on a Sports car..... But seriously is it possible that the intake angle is different between T-Storm and plain ol XL heads that that intake was made for ? Have you tried just looking at the fit without the seals blocking the view ? Maybe give you a clue as to why it won't seal. |
