| Author | Message | ||
     Migs16 |
i have a 99' the prevous owner put a forcewinder on it but never cleaned it or anything. its very dirty and messed up but i cant seem to find where i can can just buy the cone not the hole set up. any suggestions? | ||
| Kilroy |
You can order the cone by itself. If not from K&N directly, you can get them thru Custom Chrome or Drag Specialties. The trick is figuring out which one you need. There is a part # somewhere on this site. Try a search. PS they are about 80 bucks IIRC. Kilroy | ||
| Brinnutz |
Mine reads K&N F024E4 on the filter itself. Your's should also. | ||
| Koz5150 |
The should be all over eBay. After I tipped my bike over (at 85 mph on the track) I found a replacement on eBay cheaper then anywhere else. | ||
| Koz5150 |
http://shop.ebay.com/i.html?_nkw=forcewinder+filte r&_sacat=0&_trksid=p3286.m270.l1313&_dmpt=Motorcyc les_Parts_Accessories&_odkw=buell+air+filter&_osac at=0 | ||
| Migs16 |
alright thanks alot im about to order one. thanks | ||
| Jayvee |
The filters are available from K & N for about $45 or so. |
