| Author | Message | ||
     Fstevez |
i have a 96 s1 and am looking for these part# n01609.9 and n1151.9. these are the left and right side handlebar switches...im gonna call al to see if he has them but if anyone has some laying around pm me to discuss a price and shipment...thanx to all... | ||
| Leftcoastal |
Are those the same ones that the S2 used? (Stock H F'n D units with the black housings and 2 buttons and turn switch on each? Fit on 1" bars?) I have a set of those from an early 90's Fatboy or some other one of those silly softail things. Let me know. Al | ||
| F_skinner |
Al, the S1 used the 7/8 bars so the HD stuff will not fit. That being said what do you want for the early 90 fatboy controls? Are they the same as S2 controls? Frank | ||
| Fstevez |
f_skinner is correct...the s1 does have the 7/8" bars...but thank you for looking out either way Al. | ||
| Mick |
aren't they the same as XB ones, they look the same? | ||
| Vecchio_lupo |
Most of the switch gear on my 99 S3 is Italian, so check Guzzi/Ducati from late 80s to 90s for a match. | ||
| Ratbuell |
The early S1s had oddball switchgear with yellow buttons; not all black like later tubers or XBs. Even XB controls should "fit"...might have to jump some wiring pins around, but a good excuse to put Ulysses heated grips on  Worst case...the N1151 number comes up available new from the factory. I have to check your other number, it comes up invalid. | ||
| F_skinner |
The XB controls will work and will be plug and play. the only thing that will not work is the flash button for the highbeam. The harness will plug right in. | ||
| Leftcoastal |
Frank - PM sent regarding the switches. |
