Author |
Message |
Baybueller
| Posted on Wednesday, October 21, 2009 - 08:09 pm: |
|
Near 40 years of Harleys has taken its toll on the clutch hand. Has anyone found/used a conversion suitable for the X1? |
Bud
| Posted on Wednesday, October 21, 2009 - 08:24 pm: |
|
yep. the Metmachex is very nice and with a 12 mm clutch master it will be very light and theres the magura kit, personly i would prefer the Metmachex, i have driven with a magura kit for a while, but it keeps leaking gearbox oil from the connection slave / primairy cover or you need to put so much pretention on the clutch ramp/ball mechanischme that under heavy load it the clutch slippes to easy |
Baybueller
| Posted on Wednesday, October 21, 2009 - 08:35 pm: |
|
Thanks Martin, I will look into it. I bought a Kawa klr a while back and was amazed at how light the clutch pull is. |
Buellistic
| Posted on Wednesday, October 21, 2009 - 10:33 pm: |
|
Check out www.easypullclutch.com ... (Message edited by buellistic on October 21, 2009) |
Baybueller
| Posted on Sunday, October 25, 2009 - 01:02 pm: |
|
Thanks guys. I ordered the easy pull for price and install time. I will let you know how it turns out. |
Baybueller
| Posted on Monday, November 02, 2009 - 09:51 pm: |
|
I am now running the easypull. Simple install, it just takes a few tries to get the clutch properly adjusted. The pull is much lighter. Thanks again for the suggestions. |
|