Author |
Message |
Purpony
| Posted on Monday, October 12, 2009 - 09:06 pm: |
|
Is there a place that makes/sells the rear XB wheel adaptors for a tuber?? thanks |
Brinnutz
| Posted on Monday, October 12, 2009 - 09:36 pm: |
|
Call up Hal's in Wisconsin. I think they have 'em. |
Purpony
| Posted on Monday, October 12, 2009 - 09:47 pm: |
|
number or website? thanks |
Phelan
| Posted on Monday, October 12, 2009 - 11:15 pm: |
|
If you have a steel swingarm, you will most likely have to either get a new caliper bracket or trim the stock one as I did to make the wheel fit regardless of the size of the spacers. At least that's the only way I got mine in. |
Purpony
| Posted on Monday, October 12, 2009 - 11:32 pm: |
|
nope, aluminum (99 X1). Thanks for the heads up though. |
Purpony
| Posted on Wednesday, October 14, 2009 - 11:20 pm: |
|
Is Hal's, Hal's Harley Davidson? Phelan, i saw in another post you ordered spacers from NRHS. Was this for the front or the rear? |
Phelan
| Posted on Wednesday, October 14, 2009 - 11:28 pm: |
|
They were stock spacers for the front wheel. I lost one. The spacers I got were from a friend who had bought them from Hals Speed Shop (part of Hals HD I think?). I still had to cut one of them down and the brake caliper mount. |
|